ASNU offers a range of high-performance and replacement fuel injectors for Mazda applications, supporting OEM replacement, rotary performance builds and specialist motorsport projects. Each injector is selected and tested to deliver precise fuel delivery, reliability and compatibility across a wide range of Mazda engine platforms, from naturally aspirated road cars to high-performance turbocharged and rotary applications. Back Mazda Injectors MX5 MK 1 (1989 - 1997) : - B6ZE MX5 MK 1 (1994 - 1997) : - BPZE MX5 MK 2 (1998 - 2005) : - BP4W RX7 FD 13B-REW (1991 - 2002) : - 13B-REW RX8 : - RX8 RENESIS

This page displays the Manifold Upgrades ASNU have on offer. Manifold Upgrades ASNU R35 GT-R 12 Injector Conversion Manifold Part No: ASNU92/R35GTR C/KIT ASNU has developed an injector conversion kit for the R35 GTR to allow an additional 6 injectors to be fitted to the stock manifold. This was originally prototyped in conjunction with the highly respected tuning software company Ecutek to develop software strategies for 12 injector control. Allowing up to 1400hp the stock manifold is far from restrictive. With the injectors giving up well before this, we decided that what was needed was a properly engineered upgrade for the stock manifold to allow you the option to run a second set of injectors. Upper fuel rail and lower mounting plates are manufactured from aircraft-grade T6082 billet aluminium and are then bolted and bonded in place before the fuel resistant epoxy is oven cured to ensure maximum strength and durability. The injector placement and additional injectors have been optimized for maximum power and torque as they are only expected to operate at the higher engine loads. The injectors have been specially developed for this installation and are of the same ASNU SC family originally produced for the World Rally and World Rally Cross championships that flow between 300 and 1300cc static flow at 3 bar. This is on top of your existing injector flow and if run in conjunction with an ASNU 1050/14 in the primary injector location, it will allow a total of over 2600cc of fuel at 3bar fuel pressure per cylinder. To guard against potential boost leaks, additional parts are bonded in place using a specially formulated fuel (and Ethanol, Methanol) resistant epoxy. The fuel rails are manufactured with a -8 (17.5mm ) internal bore to allow maximum fuel flow. The 12 injector conversion is supplied with a loom and bespoke additional driver, allowing the driver to control the additional injectors. It works in conjunction with the ASNUR35GTR fuel rail and sensor options and is designed to be as near to plug and play as is possible at this level of engine modification. The design has been tested for bonnet clearance on both stock and a number of aftermarket fiberglass and carbon bonnets so fitment issues even on non-standard panels are not a problem.

Manual Video USB Instructions WARNING | WARNING | WARNING Do not move, change or delete any of the files contained within this ASNU flash drive, they are interconnected and they rely on each of the file interactions to operate. If disrupted it will cease to function. If VLC Media Player is set to autoplay on your device close it and open your ‘File Explorer’, go to ‘This PC’, double click to open ‘USB Drive’, double click on ‘Play DVD on PC’ and wait for it to load. When loading the USB you may be offered an update for a later version of VLC Media Player. *** DO NOT UPDATE / DOWNLOAD ANY NEW VERSIONS *** The VLC Media Player version within the USB is specifically designed for this presentation. and will not work with any other versions! Wait around 30 seconds for video to load and the Main Menu to appear. Use either the mouse or keyboard arrow keys to select your desired start point. The ‘DVD Home’ symbol button or the ‘Skip Backward’ button will take you back to the ‘Main Menu’. When you insert your ASNU USB your computer may need to load a new usb driver for this ASNU USB Drive. If this happens wait (approx 1 min) for the notice ‘Your device is ready to use’ to appear (lower right corner of screen). You may also see a pop up saying your device needs to be scanned and fixed but just press ‘Continue without scanning’. ASNU Smart TV File When Smart TV playback is used, chapter functions are not possible. ASNU Machine Manual Timecodes: 00:00:00 - 00:04:52 Introduction ** 00:08:25 - 00:28:06 Presentation ** 00:28:07 - 00:29:53 Unpacking the System 00:29:54 - 00:32:35 Setting up & Positioning 00:32:36 - 00:33:55 Safety Precautions 00:33:56 - 00:35:54 System & Safety Precautions 00:35:55 - 00:37:23 Inspection Before Testing 00:37:24 - 00:38:13 Adapters & Harness 00:38:14 - 00:40:15 Mounting the Injectors 00:40:16 - 00:46:24 Test Procedures 00:46:25 - 00:46:48 Emptying Glass Tubes 00:46:49 - 00:48:59 Prep for Ultrasonic Cleaning 00:49:00 - 00:51:20 Ultrasonic Cleaning 00:51:21 - 00:52:42 Replacing Pintle Caps 00:52:43 - 00:56:12 Re-Testing the Injectors 00:56:13 - 01:01:33 Monopoint & TBI Injectors 01:01:34 - 01:04:07 Side Feed Injectors 01:04:08 - 01:05:51 K-Jetronic Injectors 01:05:52 - 01:08:00 Megga Meter 01:08:01 - 01:08:26 Marine & Motorcycle Injectors 01:08:27 - 01:09:09 High Performance Upgrades 01:09:10 - 01:11:09 Machine Functions 01:11:10 - 01:13:52 Machine Maintenance & Service 01:13:53 - 01:14:28 Draining Ultrasonic Fluid 01:14:29 - 01:15:06 Draining Test Fluid ** Please note: if you manually skip these timecodes the ‘Menu Chapter’ function will not load and the rest of the video will continue to play. Click here to download the USB Instructions PDF

< Back ASNU at Trax Silverstone 6th October 2019 Prep Time: Cook Time: Serves: Level: About the Recipe Ingredients Preparation Previous Next

This page displays the Classic Replacement Injectors ASNU have on offer. ASNU Classic Injectors ASNU are just finalising the design & manufacture of replacement injectors for OE applications that use Bosch D-Jetronic injectors that are now no longer produced. This will keep historic vehicles on the road without the need to spend thousands on updating their fuel system and management. More information on this product range will be available very soon.

ASNU offers a range of high-performance and replacement fuel injectors for Opel applications, supporting OEM replacement, turbocharged performance upgrades and specialist motorsport projects. Each injector is selected and tested to deliver precise fuel delivery, reliability and compatibility across a wide range of Opel engine platforms, from performance road cars to high-demand track applications. Back Opel Injectors

ASNU offers a range of high-performance and replacement fuel injectors for Mitsubishi applications, supporting OEM replacement, turbocharged performance builds and specialist motorsport projects. Each injector is selected and tested to deliver precise fuel delivery, reliability and compatibility across a wide range of Mitsubishi engine platforms, from road-going performance vehicles to high-horsepower and competition applications. Back Mitsubishi Injectors 3000 GTO (1990 - 1999) : - 6G72 EVO 1-9 : - EVO 1-9 4G63T (1992 - 2007) EVO 10 : - 4B11T (2008 onwards)

This page displays a form that can be filled out by ASNU Machine Owners to register their machine and apply to be listed to Register Your ASNU Machine Add me to the ASNU Service Centres page on the website? Email me Technical tips and information & product updates? Register Thanks for submitting!

This page displays the Technical Information for each of the machines that ASNU has to offer. Tech Info Listed below are the standard features of an ASNU Classic GDI machine: - Backlit Viewing Window - Digital Operational Display - Membrane Key Pad - Injector Shot Counter Display - Injector Shot Timer Display - Duty Cycle Display - Up to 10,000 RPM - High Performance Pump Upgrade Option - Manual & Automatic Cleaning Cycles - Suitable for Motorcycle Injectors - Suitable for Injected Marine Engines - Suitable for LPG Injection - Tests up to 8 Injectors at one time - Simulates on-car Spray Patterns & Flow Rates - Injector Leak Down Test - Ultrasonic Injector Cleaning Cycle - 12 Language Selection Screen - LBS per Hour to Millilitres Calculator - Easy to Read LCD Screen All Features listed below are additional features included in the Classic GDI machine: - Wider Range of Functions - Suitable for All Types of Manifold & GDI Injectors - Sequential Injector Firing Order for GDI Injectors - Single Injector Selection During Multi Injector Operation - Static & Dynamic operation - Peak & Hold Current Control with ECU matched current settings - Fast injector turn on & turn off circuits giving more repeatable results - 18 Various M/S & RPM Test Settings - Injector Inductance Test – Checking Injector Electro Magnetic Circuit - USB Computer Interface for user setting of pulse widths and currents - Sequential or Simultaneous operation option for Manifold Injectors - Suitable for Piezo Injectors by the addition of the ASNU PIEZO ADAPTER BOX - Includes Additional Tools for fitting of replacement Teflon Seals - Includes Additional Rail Adapters for the various types of GDI injectors - Includes Additional Injector Harnesses for the various types of GDI injectors UnPacked: Weight - 30kg Size - L: 55 W: 45 H: 70cm Packed: Weight - 48kg Size - L: 67 W: 57 H: 83cm Input Voltage: 96v – 265v Listed below are the standard features of an ASNU Junior: - Backlit Viewing Window - Digital Operational Display - Membrane Key Pad - Injector Shot Counter Display - Injector Shot Timer Display - Duty Cycle Display - Up to 10,000 RPM - Ultrasonic Injector Cleaning Cycle - Manual & Automatic Cleaning Cycles – 3 options - Stand-alone Ultrasonic Cleaning Bath – available with or without bath - 2 Ultrasonic Bath Options Technical Specifications: Input/Output Voltage: 96v - 265v AC / 13.8v DC Fuel Pressure: 0 – 6 bar Fuel Pump: Magnetic overload release Casing Coating: Nylon ASNU Junior Carton: 50 X 52 X 72 cm ASNU Junior Bench Size: 50 X 52 X 72 cm Packed Weight / Un-Packed Weight: 24 klg / 15 klg - Suitable for Motorcycle Injectors - Suitable for Gasoline Direct Injection (with optional GDI Box required) - Suitable for Injected Marine Engines (with optional 2 Stroke GDI Box required) - Suitable for LPG Injection (optional equipment required) - Tests up to 6 Injectors at one time - Simulates on-car Spray Patterns & Flow Rates - Injector Leak Down Test - 12 Language Selection Screen - LBS per Hour to Millilitres Calculator - Easy to Read LCD Screen Listed below are the standard features of an ASNU GDI/FSI Adapter Box: - Dedicated Driver Currents - Suitable for all Types of GDI Injectors - Tests up to 8 GDI/FSI Injectors at one time - Sequential Injector Firing Operation - 18 Various M/S & RPM Test Settings - Suitable for Standard Manifold Injectors - High Performance Option - Simulates on-car Spray Patterns & Flow Rates - Accepts High & Low Resistance Injectors - Single Injector Selection Operation - Injector Leak Down Test - Injector Inductance Test - Electro Magnetic Circuit (mH) - Ultrasonic Injector Cleaning Cycle - 12 Language Selection Screen - Easy to Read LCD Screen - Membrane Key Pad - Separate Wiring Harnesses - Teflon Seal Fitting Tool - Use with any ASNU System - Updates old ASNU Machine to Latest Specification - Easy Connection to ASNU System - Could be used with Non ASNU System Technical Specifications: Input/Output Voltage: 96v - 265v AC / 13.8v DC Fuel Pressure: 0 – 6 bar Fuel Pump: Magnetic overload release Casing Coating: Nylon ASNU Junior Carton: 50 X 52 X 72 cm ASNU Junior Bench Size: 50 X 52 X 72 cm Packed Weight / Un-Packed Weight: 24 klg / 15 klg Listed below are the standard features of an ASNU Piezo Adapter Box: - Easy to use test functions using the latest Piezo technology - Easy connections to Classic GDI Machine or GDI adapter box - Universal fittings for Piezo type injectors Technical Specifications: - Dimensions: 300mm x 190mm x 220mm in robust metal casing Listed below are the standard features of an ASNU 2 Stroke GDI Marine Adapter Box: - Run Ficht and ETEC injectors using any ASNU Classic GDI machine/GDI Box - Recover seized injectors - Clean fouled injectors - Leak test injectors - Dynamic flow test injectors (pulsing) - View Spray Patterns Technical Specifications: - Automatic detection detection of Ficht or ETEC injector connection - High voltage drive - Uni-directional high current drive (Ficht) - Bi-directional high current drive (E-TEC) - 100-5000 injections per minute pulsing range - 96-264Vac 50/60Hz electrical supply range

ASNU are the world-leading name in the Testing & Servicing of gasoline injectors. With 30 years of experience, our constant strive in research and development has led us into sectors of the major vehicle manufactures, specialist performance, mass transit vehicles, and the marine engines sector. About ASNU In the ever increasing demand for fuel efficiency, greener emissions and enhanced engine performance ASNU Corporation Europe Limited has created a special purpose program of injector diagnostics. ASNU’s 30 year history is testimony that the Company are a World leader in this exacting commercial arena. ASNU’s constant strive in research and development has led the Company into sectors of the major vehicle manufactures, specialist performance, mass transit, commercial vehicles and marine.

This page displays the Fuel Rails ASNU have on offer. Fuel Rails We have designed and manufactured Performance Fuel Rails for various applications to fit our ASNU Performance Injectors. These include top feed replacement rails, along with converting from side feed to top feed applications. Below is a selection of the current fuel rails that we offer: R35 GT-R Twin Fuel Rail Set (Part No: ASNU092/GTR-R35) The ASNU R35 GTR fuel rail is designed for ultra high-performance engines looking for that something extra to give you the edge. Our rail allows for the retention of your stock rail mounted fuel damper which is required to reduce fuel rail pressure pulses when running large injectors with non-standard pump systems. The rail also retains the OE injector harness mounting tabs for a professional appearance. Designed with upgrades in mind, the stock damper can be replaced with fuel pressure and temperature monitoring sensor kit with EcuTek compatibility. Boasting an internal bore of 17mm, and an impressive capacity of 1700cc (over 11 times that of the stock rail) this gives the rail the capacity to supply even the largest of injectors. It is designed to fit the OE injector fitment and of course the ASNU range of Performance Injectors. The rail is supplied with -8AN feed & -6AN return fittings and a high flow & lightweight transfer hose from BMRS. It is machined from grade T6082 aluminium and finished in a hard anodised coating. This rail will meet the requirements of top tuning specialists both specification and aesthetics wise. The rail is supplied with -8AN fittings, and is not designed to plug and play with stock lines. We do not recommend running these rails with the stock lines! If you need to run our rails with the stock lines, then you will need to purchase our adaptor kit ASNU092/R35RegMount which consists of 2 of the parts shown below: SR20DET VVT Top Feed Conversion Rail (Part No: ASNU092/SR20DET) The system allows the conversion of a stock SR20DET manifold to top feed injectors without having to remove the idle speed control valve and keeping the original pipework. The rail is manufactured from 6082 aluminium and unlike our 1st generation rail, the new rail is machined from one piece and has standard –6 fittings on either end. The rail is supplied complete with manifold seals for the stock inlet (aftermarket manifold fitment is available at extra cost), bolts to attach to the manifold and an Aeroquip FC332 (or for an extra cost, we can supply a BMRS PTFE with stainless over braid) link pipe. Subaru WRX Twin Top Feed Conversion Rail (Part No: ASNU092/WRX1) The ASNU Subaru WRX 1 rail allows you to convert your EJ20 Phase 1, 1.5, or 2 engine from its’ stock side feed rails to more desirable top feed injectors whilst operating with the OE manifold. Due to the unique design, our rail is able to accommodate all of the early side-feed installations without additional plates or adaptors for the different phases. With motorsport in mind, it has been optimised for reduced weight without sacrificing reliability and performance; coming in at 520 grams including fittings manifold adaptors and bolts. The rails are able to accept the full range of ASNU injectors from 300 to 1500cc; giving an exceptionally wide range of flows and spray patterns and allowing you to optimise the injector to your requirements. Designed for minimum height from the cylinder head and reduced length on the rearward end of the rail to improve clearance on the intake housing for large turbos. For maximum turbo clearance, it can accept a special swept fitting incorporating a 90-degree elbow (this is not included as standard in the kit). Specifically designed to optimise the injector location for maximum performance when used with ASNU injectors. They are able to flow up to 1000L/h with minimal pressure drop, in twin feed centre return configuration; giving guaranteed fuel supply capability up to 1500HP. Due to the improved flow of the rails beyond the capability of the OE regulator, our rails require the use of an up-rated remote mount fuel pressure regulator. The fuel rail is manufactured from high strength billet T6082 aluminium alloy and is supplied with industry-standard -6AN to AN6 ORB fittings to safeguard against fuel leaks even at high pressures. The fuel rail spacers are manufactured from acetyl tubes to minimise heat transfer from the engine to the fuel rail. The rails are supplied with stainless steel bolts to avoid both surface rust and galvanic corrosion. 2JZ VVTI Supra Top Feed Conversion Rail (Part No: ASNU092/2JZ) We are pleased to announce we now have ASNU 2JZ VVTI Top Feed Conversion Fuel Rails available! After working closely with our machine shop, and some of our Performance team, we now have a top feed fuel rail conversion for the 2JZ VVTI engine found in the MK4 Toyota Supra. This fuel rail is designed specifically to work with our ASNU Performance injectors and will allow you to run ASNU Performance Injectors that can be built to suit from 300cc up to 1500cc. Our fuel rail comes with the manifold adapters required to work with our ‘A’ cap fitment injectors, along with upright fittings and AN8 to Orb8 fittings to attach to custom fuel lines. The rail also has a centre port with a blanking plug, giving you the option to have twin end feeds and centre return for high power applications or retain the blank for standard use. We also have plug and play harness adapters as an optional add-on if you are not changing your injector harness loom Part No: (ASNU090/HA013)

< Back ASNU Exhibiting at The SEMA Show 1st - 4th November Laura Bonafont 27 Oct 2022 ASNU are pleased to announce that we will be exhibiting at The SEMA Show from November 1st-4th at the Las Vegas Convention Center in Las Vegas, Nevada. Make sure to come over and say hello to our many ASNU representatives at booth #23321 We'd love to hear from you and answer any of your questions. See you there! Previous Next